MikesShields

Sport Touring Windshields for the Kawasaki Ninja 250R
1988-2007 and 2007-2009 Kawasaki Versys

Ninja 250 Windshields
Euro Model	Tinted Euro	Euro Sport	Sport Model	Winter Wings	Euro Gt
$65.00	$65.00	$45.00	Discontinued	$15.00	$90.00
Shipping is including with pricing unless your shipping to Canada. If so click below to add USPS shipping fee's for Canada ($25.00)

The EURO model is 17" tall, (taller by special order) 11" wide at the top and 15" wide at the base.	The Euro Sport is 12" tall, 11" wide at the top and 15" wide at the base.	The EURO GT is a 21+ inch tall version of the EURO. Its 2 inches wider at the base as well. Its made from 3/16 thick material So you will need to source longer Screws and nylon nuts for mount-ing.
The Sport Model is 17" tall, 10" wide at the top and 20.5" wide at the hand guard.	The Winter Wings are designed to block the cold winter air From reaching your hands. May need longer mirror bolt for sport model.

Kawasaki Versys Windshields Versys Touring Price increase due to use of thicker material
Clear Touring	Tinted Touring	Tinted Sport	GT Grand Touring
$90.00	$90.00	$45.00	$125.00
Shipping is including with pricing unless your shipping to Canada. If so click below to add USPS shipping fee's for Canada ($25.00)

The Versys Touring model is 17" tall, 12" wide at the top and 16" wide at the base. Available tinted or clear 3/16 thick

The Versys Sport is 12" tall, 12" wide at the top and 16" wide at the base. Tinted only 1/8 thick

The Versys Grand Touring is 21" tall, 15" wide at the top and 16" wide at the base. Clear only 3/16 thick. If you have hand guards you may want to drill your own mounting holes (see below)

Drilling your own (Versys GT buyers please read)?

Since there are various mounting possibilities for the Versys in regards to

brush guards and bar risers, if you have these installed I suggest you buy a shield

that is not drilled so you can mount it with the clearance you want. If you have risers and or

brush guards the shield may hit at full lock. It is not designed for these accessories but

can work if you mount it by drilling your own holes to work with “your setup”. I have BarkBusters

On my Versys and the shield does not touch at full lock.

Several people have asked about ordering the shields without mounting holes.
If you would like to drill your own just let me know and I will send your order
without the holes drilled. If you plan to drill your own shield here are some tips
Drill the shields from the inside out. Use a masonry bit at high RPM with
light pressure, put masking tape on the outside over the hole location prior to drilling.
Always drill with the backside supported and do not force the bit.
By using light pressure, a masonry bit and high RPM you are almost
melting your way through as much as cutting.

Please Read Before Ordering

Most orders are shipped 7 to 10 working days after payment received,
sometimes longer sometimes shorter. This is a hobby for me that's
done during my free time which is limited at times by my real job.

If you would like to receive your shield sooner please contact me to check

On the possibility of priority service. This would require an additional $25

to cover overnight or 2^nd day delivery (sorry not available in Canada).

Please contact me FIRST for priority handling and shipping, then if its

possible I will send a request to you for the additional cost and get

your shield made and shipped within two business days (that’s Mon-Fri).

Shields are made from 1/8th inch Acrylic Plexiglass unless noted

Contact Me

If you have any questions or would like a custom sized
shield feel free to contact me on AIM at Gti20vTurbo
or using email at gti20vturbo@yahoo.com

XboX GT is giaka